The OVS-01CC from OPTEX is designed to reliably detect the presence of a stationary or moving vehicle while also having the ability to ignore most human traffic. It also eliminates the hassles associated with the installation of a ground loop. No more concrete cutting required. The OVS-01CC can be mounted 2 to 3 feet off the ground and can detect both small and large vehicles. Its detection area can be customized with 8 range settings, 5 sensitivity settings and one-touch calibration. And because it is important to ignore human movement in car-counting applications, the OVS-01CC has 5 selectable menu setting options to ignore the movement of people through the detection area.

The OVS-01CC features 8 range settings for the microwave from 3' to 26'. The simple-to-use menu also has 5 settings for Human Cancellation Adjustment, 5 Sensitivity settings, and One-Touch Calibration.



The Minipost for the OVS-01GT and CC sensors from OPTEX


Minipost for mounting the OVS-01GT and OVS-01CC sensors



Single Gang Adapter for wall mounting the OVS-01GT and OVS-01CC sensors


Detection method: Microwave (Doppler shift and FMCW)
Frequency: 24GHz
Response time: 300msec
Power supply: 12-24VDC
Current consumption: Max 200mA (at 24VDC) with Heater ON; Max 80mA (at 24VDC) when Heater is OFF
Output: Relay output DC30V, 0.3A (NO/NC selectable)
Input: NO/NC input
Detection range: 3ft. to 26ft. (1 to 8m) Programmable maximum range
Detectable vehicle speed: 1.24mph-37.28mph (2 to 60km/h)

Sensitivity: Level 1 to 5
Human Cancel Adjust: Level 1 to 5
Presence Detection Timer: 5 / 60 / 180 / Infinity min
Sensitivity Boost Timer: Off / 5 / 10 / 20 / 40 sec
Input: Wake L / Wake H / Inhibit L / Inhibit H
Output: NO / NC
Max. Range: 3/7/10/13/16/20/23/26 ft. (1/2/3/4/5/6/7/8 meters)
Sensor Mode: Activation / Vehicle protection

Normal operation: Stand-by: Solid Green, Detection: Solid Red
Detection area check: Non-detection: Blinking Green
Detected: Blinking Yellow
Calibration: In calibration: Fast blinking blue
Sensor reset: Reset completed: Blinking yellow for 2 seconds

Human cancellation: Available from Level 1 to 5
Operation temperature: -22°F to 122°F (-30°C to 50°C)
Operation humidity: 95% max. (non-condensing)
International Protection code: IP65
Installed condition: Indoor/Outdoor
Installation height: Installation Height of 20in. (500mm)
Horizontal angle adjustment: Horizontally: +/-30 deg. (5 deg. steps)
Weight: 480g (Including accessories)
Accessories: 4 screws and installation manual


Spec. sheet | Quick Reference Guide | Manual